OUR PRODUCTS IN BRIEF

LOW TENSION CURRENT TRANSFORMER (under the following types)

ABS CASE CURRENT TRANSFORMER
RING TYPE METERING CURRENT TRANSFORMER
RECTANGULAR TYPE CURRENT TRANSFORMER
WPL TYPE CURRENT TRANSFORMER
PROTECTION TYPE CURRENT TRANSFORMER
SPECIAL PROTECTION (PS CLASS ) CURRENT TRANSFORMER
RESIN CAST CURRENT TRANSFORMER


ABS CASE CURRENT TRANSFORMER

THIS TYPE OF CURRENT TRANSFORMER IS HIGHLY TEMPERATURE RESISTANT AND FIRE PROOF GLASFILLED THERMOPLASTIC CASING. THESE CURRENT TRANSFORMER ARE USED FOR LOCATING NEAR HIGH TEMPERATURE AREAS. IT IS COMPACT, STURDY AND ECONOMICAL DESIGN. IT IS MADE OF HIGH QUALITY MATERIAL, FLAME RETARDING AND SELF EXTINGUISHING. IT IS EASY BUSBAR MOUNTING AND LOOKS ATTRACTIVE.


RING TYPE CURRENT
TRANSFORMER

RING TYPE METERING CURRENT TRANSFORMER

THIS TYPE IS AVAILABLE FROM 50/5 TO 3000/5 AND THEREON. OUTPUT AND ACCURANCY INCREASES WITH INCREASED RATIOS. THIS TYPE IS SELECTED DUE TO ITS MECHANICAL STRENGTH AND IT IS ECONOMICAL. THIS IS OFFERED IN TAPE INSULATED CONSTRUCTION..


RECTANGULAR TYPE

THIS TYPE IS AVAILABLE FROM 50/5 TO 3000/5 AND THEREON. OUTPUT AND ACCURANCY INCREASES WITH INCREASED RATIOS. THIS TYPE IS ALSO SELECTED DUE TO ITS MECHANICAL STRENGTH AND IT IS SLIGHTLY COSTLIER THAN RING TYPE. THIS IS OFFERED IN TAPE INSULATED CONSTRUCTION IN RECTANGULAR MODEL.


WPL TYPE

WPL TYPE CURRENT TRANSFORMER (Wound Primary Type)

THIS TYPE IS AVAILABLE FROM 2.5/5 TO 200/5 AND THE ACCURACY AND THE BURDEN INCREASES WITH INCREASING RATIOS. FOR HIGHER RATIOS MORE THAN 200/5, THE RING TYPE CURRENT TRANSFORMER ARE RECOMMENDED DUE TO ITS LOW COST. THIS TYPE OF WPL CTs ARE SUGGESTED FOR CTs BELOW 100/5 RATIOS, THE ACCURACY OF THESE CTs WILL BE SUFFERING DUE TO ITS LOW AMPERE TURNS. THIS CAN BE OVERCOME BY WOUND PRIMARY TYPE CTs. THIS TYPE OF CTs COMES UNDER TAPE INSULATED AND BOTH SIDE COVERED WITH HYLAM BOARDS WITH PRIMARY AND SECONDARY WINDINGS.



PROTECTION TYPE

PROTECTION TYPE CURRENT TRANSFORMER &
SPECIAL PROTECTION (PS CLASS) CURRENT TRANSFORMERS

THESE TYPE OF PROTECTION AND PS CLASS CURRENT TRANSFORMERS COMES UNDER TAPE INSULATED CONSTRUCTION AS SEEN IN RING TYPE AND RECTANGULAR TYPE AND USED FOR PROTECTION PURPOSE. THIS COMES UNDER SPECIFICATION 10P10, 10P3, 5P10, PS CLASS AND THEREON. IT LOOKS SIMILAR TO RING TYPE AND RECTANGULAR TYPE WITH TAPE INSULATED CONSTRUCTION. THE SIZE AND COST OF THE PROTECTION AND PS CLASS CURRENT TRANSFORMER WILL ABNORMALLY VARY FROM THE NORMAL CTs.



RESIN CAST TYPE

RESIN CAST CURRENT TRANSFORMERS

THE RESIN CAST CTs ARE SIMILAR TO OTHER NORMAL CTs. THE ONLY DIFFERENCE IS ITS MOULDING. INSTEAD OF TAPE WOUND, THESE TYPE OF CTs ARE MOULDED WITH EPOSY RESIN TO WITHSTAND IN HIGH TEMPERATURE AREAS. THIS TYPE OF CTs ARE NORMALLY USED FOR LOCATING NEAR HIGH TEMPERATURE AREAS LIKE ELECTRICAL FURNACES, WOVENS, HEAT PRODUCING EQUIPMENTS ETC.,



Website Designed And Powered By rrsofttech.com